Show simple item record

dc.contributor.authorHan-Chin Wu
dc.contributor.authorChin-Cheng Ho
dc.date.accessioned2017-05-08T23:41:26Z
dc.date.available2017-05-08T23:41:26Z
dc.date.copyrightOctober, 1993
dc.date.issued1993
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26959#345_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/111989
dc.description.abstractCombined axial-torsional experiments have been conducted at room temperature on thin-walled tubes to investigate the strain hardening behavior of annealed 304 stainless steel due to creep. The constant strain-rate dynamic loading (or SCISR) surfaces representing the state of material before and after creep have benn determined. It has been found that transient creep essentially causes the loading surface to undergo kinematic hardening with insignificant amount of isotropic hardening for this material. A conclusion is drawn that the loading surface hardened by transient creep is the same as that hardened by plastic deformation. This is true both for specimens with pure tension and pure torsion loading paths. The results confirm assumptions of the overstress theory of viscoplasticity.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStrain Hardening of Annealed 304 Stainless Steel by Creep
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904228
dc.journal.fristpage345
dc.journal.lastpage350
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsStainless steel
dc.keywordsWork hardening
dc.keywordsHardening
dc.keywordsDynamic testing (Materials)
dc.keywordsTorsion
dc.keywordsTemperature
dc.keywordsViscoplasticity
dc.keywordsTension AND Deformation
dc.treeJournal of Engineering Materials and Technology:;1993:;volume( 115 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record