Show simple item record

dc.contributor.authorB. Guo
dc.contributor.authorS. Miska
dc.contributor.authorR. L. Lee
dc.date.accessioned2017-05-08T23:41:08Z
dc.date.available2017-05-08T23:41:08Z
dc.date.copyrightSeptember, 1993
dc.date.issued1993
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26451#202_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/111828
dc.description.abstractThis paper focuses on the use of the 3-D drilling trajectory equations derived from the concept of constant curvature. It is shown that the constant curvature equations are specially useful for horizontal drilling. Three examples of using the constant curvature method are presented to demonstrate the practical usefulness of the proposed concept. The results obtained reveal that the well trajectory with constant curvature is not only consistent with directional performance of deflection tools, but also yields less dogleg severity. This, in turn, should increase the fatigue life of drillstring elements passing through the curved segments of the hole. Finally, drag and torque computations show that, thanks to less dogleg severity, the drag and torque are expected to be less in holes designed to have constant wellpath curvature.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Innovation in 3-D Drilling Trajectory Design Using Concept of Constant Curvature
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2905994
dc.journal.fristpage202
dc.journal.lastpage207
dc.identifier.eissn1528-8994
dc.keywordsDrilling
dc.keywordsTrajectories (Physics) AND Design
dc.treeJournal of Energy Resources Technology:;1993:;volume( 115 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record