Show simple item record

dc.contributor.authorE. D. Tung
dc.contributor.authorG. Anwar
dc.contributor.authorM. Tomizuka
dc.date.accessioned2017-05-08T23:40:54Z
dc.date.available2017-05-08T23:40:54Z
dc.date.copyrightJune, 1993
dc.date.issued1993
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26194#279_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/111691
dc.description.abstractOne of the most significant sources of tracking error for an X-Y table is static friction, a nonlinear disturbance at low velocity. In traversing a circular profile, an X-Y table encounters zero velocity crossings at ninety degree intervals around the circle, leaving relatively large tracking errors referred to as “quadrant glitches.” To learn the control input which eliminates errors caused by stiction, repetitive control, a subclass of learning control, is employed. Experiments, conducted on the X-Y bed of a CNC milling machine, demonstrate that near-perfect tracking can be achieved in twelve cycles or less. Of particular interest is the velocity command input generated by repetitive control. The input contains feedforward information for developing perfect trajectories at low velocities.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLow Velocity Friction Compensation and Feedforward Solution Based on Repetitive Control
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue2A
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2899032
dc.journal.fristpage279
dc.journal.lastpage284
dc.identifier.eissn1528-9028
dc.keywordsFriction
dc.keywordsFeedforward control
dc.keywordsErrors
dc.keywordsStiction
dc.keywordsMachining centers AND Cycles
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1993:;volume( 115 ):;issue: 2A
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record