Show simple item record

dc.contributor.authorB.-S. Yuan
dc.contributor.authorW. J. Book
dc.contributor.authorJ. D. Huggins
dc.date.accessioned2017-05-08T23:40:51Z
dc.date.available2017-05-08T23:40:51Z
dc.date.copyrightSeptember, 1993
dc.date.issued1993
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26197#394_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/111649
dc.description.abstractThis work seeks to provide an effective way for developing the dynamics of a multi-link flexible manipulator consisting of rotary joints connecting two links. Kinematics of both the rotary joint motion and the link deformation are described by 4×4 transformation matrices as proposed in previous works (Book, 1984). The link deflection is assumed small so that the link transformation can be composed of summations of assumed link shapes. To determine the appropriate choice of component mode shapes, two essential techniques employed here are experimental and finite element methods. The resulting equations of motion allow the complete nonlinear model to be recursively derived from the Jacobian matrix and the mass properties via symbolic manipulation. Two prototype models of flexible manipulators are used to verify the dynamics with frequency and time responses. This paper contributes several new results: (1) the velocity terms (Coriolis and centrifugal forces) are related to variations in the mass matrix, (2) the skew symmetry of certain useful terms are shown, (3) the system is theoretically demonstrated to be stable with joint P.D. controllers in addition to an experimental approach, (4) practical and effective incorporation of actuator dynamics (hydraulic cylinder) and structural complexity (non-uniform cross section) is achieved through selection of mode shapes, (5) geometric constraints are incorporated through simplified coordinate transformations and (6) the results are verified on two physical cases.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDynamics of Flexible Manipulator Arms: Alternative Derivation, Verification, and Characteristics for Control
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2899115
dc.journal.fristpage394
dc.journal.lastpage404
dc.identifier.eissn1528-9028
dc.keywordsDynamics (Mechanics)
dc.keywordsFlexible manipulators
dc.keywordsShapes
dc.keywordsKinematics
dc.keywordsJacobian matrices
dc.keywordsDeformation
dc.keywordsControl equipment
dc.keywordsMotion
dc.keywordsCentrifugal force
dc.keywordsHydraulic cylinders
dc.keywordsEquations of motion
dc.keywordsFinite element methods
dc.keywordsEngineering prototypes
dc.keywordsActuators AND Deflection
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1993:;volume( 115 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record