Show simple item record

dc.contributor.authorOng Lin Seng
dc.date.accessioned2017-05-08T23:39:24Z
dc.date.available2017-05-08T23:39:24Z
dc.date.copyrightFebruary, 1992
dc.date.issued1992
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28333#12_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/110786
dc.description.abstractA theory is presented to analyze the effectiveness of incorporating a wear plate at the saddle support of a cylindrical pressure vessel. The wear plate can be either welded to the vessel or of loose fitting. The theory is based on a contact stress formulation together with the use of a cylindrical shell bending theory for simply supported cylinder. The effectiveness of the wear plate in reducing the peak circumferential saddle-horn stress is quantified by definition of a stress reduction factor. Parametric data are carried out for the saddle angle of 120 deg. From the study, the optimum thickness of the wear plate for three different angular extensions, are obtained.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffectiveness of Wear Plate at the Saddle Support
dc.typeJournal Paper
dc.journal.volume114
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929004
dc.journal.fristpage12
dc.journal.lastpage18
dc.identifier.eissn1528-8978
dc.keywordsWear
dc.keywordsStress
dc.keywordsPipes
dc.keywordsCylinders
dc.keywordsFittings
dc.keywordsThickness
dc.keywordsVessels AND Pressure vessels
dc.treeJournal of Pressure Vessel Technology:;1992:;volume( 114 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record