Show simple item record

dc.contributor.authorS. H. Yoo
dc.contributor.authorJ. Pan
dc.date.accessioned2017-05-08T23:39:23Z
dc.date.available2017-05-08T23:39:23Z
dc.date.copyrightMay, 1992
dc.date.issued1992
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28334#178_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/110769
dc.description.abstractA simple parabolic formula that describes the opening profile of a sufficiently long circumferential crack in a pipe subjected to bending and tension was found after a proper normalization of the second-order asymptotic expansion of the solutions of Sanders and Alabi [5-9]. Here the crack is sufficiently long in the sense that approximately the crack angle is larger than a small parameter which has the same order of magnitude as the ratio of the wall thickness to the pipe radius, and the pipe is sufficiently long enough not to consider the end effects. These linear elastic solutions can be superposed for combined bending and tension loading. The smile parabolic formula is shown to be a good approximation of the crack opening profile and can be used to evaluate the leak rate for crack length up to one-half of the circumference.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleApproximate Crack Opening Displacement Solutions for Long Circumferential Cracks in Pipes Subjected to Bending and Tension
dc.typeJournal Paper
dc.journal.volume114
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929026
dc.journal.fristpage178
dc.journal.lastpage180
dc.identifier.eissn1528-8978
dc.keywordsFracture (Materials)
dc.keywordsPipes
dc.keywordsDisplacement
dc.keywordsTension
dc.keywordsFormulas
dc.keywordsApproximation
dc.keywordsWall thickness AND Leakage
dc.treeJournal of Pressure Vessel Technology:;1992:;volume( 114 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record