Show simple item record

dc.contributor.authorD. P. Updike
dc.contributor.authorS. M. Caldwell
dc.contributor.authorA. Kalnins
dc.date.accessioned2017-05-08T23:39:22Z
dc.date.available2017-05-08T23:39:22Z
dc.date.copyrightMay, 1992
dc.date.issued1992
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28334#149_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/110764
dc.description.abstractA theoretical model of an expanded tube-to-tubesheet joint is developed and examined with the objective to determine the residual stresses in the transition zone, which lies between the expanded and unexpanded regions of the tube. Owing to their effect on the development of stress corrosion cracks, the residual tensile stresses on the surfaces of the tube are of particular interest. A mathematical model that can predict these residual stresses is developed. Results of the model show that the maximum tensile residual stresses are axial and occur on the inside diameter of the expanded tube. It is shown in a parameter study that, for expansions that ensure a leak-tight joint, the maximum residual tensile axial stress on the inside surface of the tube reaches 80–95 percent of the yield stress of the tube, regardless of the geometrical and material parameters of the tube and tubesheet.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleResidual Stresses in Transition Zones of Heat Exchanger Tubes
dc.typeJournal Paper
dc.journal.volume114
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929022
dc.journal.fristpage149
dc.journal.lastpage156
dc.identifier.eissn1528-8978
dc.keywordsHeat exchangers
dc.keywordsResidual stresses
dc.keywordsStress corrosion cracking
dc.keywordsStress
dc.keywordsTension
dc.keywordsYield stress AND Leakage
dc.treeJournal of Pressure Vessel Technology:;1992:;volume( 114 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record