Show simple item record

dc.contributor.authorR. J. Scavuzzo
dc.contributor.authorP. C. Lam
dc.contributor.authorJ. S. Gau
dc.date.accessioned2017-05-08T23:39:21Z
dc.date.available2017-05-08T23:39:21Z
dc.date.copyrightAugust, 1992
dc.date.issued1992
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28337#315_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/110749
dc.description.abstractThe ABAQUS finite element code was used to model a pressurized pipe and subjected to cyclic bending loads to investigate ratcheting. A 1-in. schedule 40 pipe was loaded with a slow (static) cyclic load. The pipe internal pressure was varied from 0 to 6000 psi. Two types of materials were considered: an elastic perfectly plastic and a bilinear elastic-plastic material. Two types of finite elements of the ABAQUS program were compared to analytical solutions to evaluate the element accuracy in the plastic regime. Depending upon loading conditions and specified material properties, three different responses were observed from the finite element analyses: cyclic plasticity, ratcheting of the hoop strain, or shakedown. These analytical results are compared to some experimental measurements.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleRatcheting of Pressurized Piping Subjected to Seismic Loading
dc.typeJournal Paper
dc.journal.volume114
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929046
dc.journal.fristpage315
dc.journal.lastpage320
dc.identifier.eissn1528-8978
dc.keywordsPipes
dc.keywordsFinite element analysis
dc.keywordsStress
dc.keywordsMaterials properties
dc.keywordsPressure
dc.keywordsPlasticity AND Measurement
dc.treeJournal of Pressure Vessel Technology:;1992:;volume( 114 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record