Show simple item record

dc.contributor.authorR. D. Cheverton
dc.contributor.authorD. L. Selby
dc.date.accessioned2017-05-08T23:39:19Z
dc.date.available2017-05-08T23:39:19Z
dc.date.copyrightNovember, 1992
dc.date.issued1992
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28338#396_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/110725
dc.description.abstractAn integrated probabilistic approach for the evaluation of the pressurized-thermal-shock (PTS) issue was developed at the Oak Ridge National Laboratory (ORNL) at the request of the Nuclear Regulatory Commission (NRC). The purpose was to provide a method for identifying dominant plant design and operating features, evaluating possible remedial measures and the validity of the NRC PTS screening criteria, and to provide an additional tool for estimating vessel life expectancy. The approach was to be integrated in the sense that it would include the postulation of transients; estimates of their frequencies of occurrence; systems analyses to obtain the corresponding primary-system pressure, downcomer coolant temperature, and fluid-film heat-transfer coefficient adjacent to the vessel wall; and a probabilistic fracture-mechanics analysis using the latter data as input. A summation of the products of frequency of transient and conditional probability of failure for all postulated transients provides an estimate of frequency of vessel failure. In the process of developing the integrated-pressurized-thermal-shock (IPTS) methodology, three specific-plant analyses were conducted. The results indicate that the NRC screening criteria may not be appropriate for all U.S. pressurized-water-reactor (PWR) plants; that is, for some PWRs, the calculated mean frequency of vessel failure corresponding to the screening criteria may be greater than the “primary-acceptance-criterion” value in Regulatory Guide 1.154 . A recent review of the ORNL IPTS study, which was completed in 1985, indicates that there are a number of areas in which the methodology can and should be updated, but it is not clear whether the update will increase or decrease the calculated probabilities.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Probabilistic Approach to the Evaluation of the PTS Issue
dc.typeJournal Paper
dc.journal.volume114
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929245
dc.journal.fristpage396
dc.journal.lastpage404
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsFracture mechanics
dc.keywordsTemperature
dc.keywordsHeat transfer
dc.keywordsSystems analysis
dc.keywordsCoolants
dc.keywordsShock (Mechanics)
dc.keywordsFailure
dc.keywordsFluid films
dc.keywordsFrequency
dc.keywordsIndustrial plants
dc.keywordsProbability
dc.keywordsVessels
dc.keywordsPlant design AND Pressurized water reactors
dc.treeJournal of Pressure Vessel Technology:;1992:;volume( 114 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record