Show simple item record

dc.contributor.authorK. P. Rao
dc.contributor.authorE. B. Hawbolt
dc.date.accessioned2017-05-08T23:38:38Z
dc.date.available2017-05-08T23:38:38Z
dc.date.copyrightJanuary, 1992
dc.date.issued1992
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26946#116_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/110367
dc.description.abstractEmpirical or semi-empirical stress-strain relationships are of limited applicability because (i) they require a large number of constants to represent the effect of process variables, (ii) they are not able to adequately describe the typical hot deformation characteristics i.e., strain hardening at lower strains and steady state flow stress at higher strains, and (iii) they are not able to provide reliable extrapolation. In the present study, flow curves for hot deformation of a medium carbon steel in compression were obtained using a computer controlled thermo-mechanical simulator. The flow stress data were analyzed using three Arrhenius-type equations, each representing the flow stress in terms of strain rate and temperature at different strain levels. It was found that the hyperbolic-sine equation represented the data very well; each of the different activation parameters of this equation varied systematically with strain, and could be satisfactorily described using a power relationship. Using these proposed relationships the flow stress can be described in terms of the process variables—strain, strain rate and temperature—in an explicit fashion of use in finite-element analysis of hot deformation processes.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDevelopment of Constitutive Relationships Using Compression Testing of a Medium Carbon Steel
dc.typeJournal Paper
dc.journal.volume114
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904131
dc.journal.fristpage116
dc.journal.lastpage123
dc.identifier.eissn1528-8889
dc.keywordsCarbon steel
dc.keywordsTesting
dc.keywordsCompression
dc.keywordsFlow (Dynamics)
dc.keywordsStress
dc.keywordsDeformation
dc.keywordsEquations
dc.keywordsTemperature
dc.keywordsComputers
dc.keywordsFinite element analysis
dc.keywordsStress-strain relations
dc.keywordsSteady state AND Work hardening
dc.treeJournal of Engineering Materials and Technology:;1992:;volume( 114 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record