Show simple item record

dc.contributor.authorS. M. Tipton
dc.contributor.authorG. J. Shoup
dc.date.accessioned2017-05-08T23:38:36Z
dc.date.available2017-05-08T23:38:36Z
dc.date.copyrightJanuary, 1992
dc.date.issued1992
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26946#27_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/110351
dc.description.abstractOpen link lifting chain is routinely proof loaded during manufacture. However, the effect of residual stresses imposed by this operation on the fatigue strength of the chain has not been quantitatively investigated. This paper discusses the results of constant amplitude fatigue tests on open link chain segments which have received proof loading at various levels. The chain was initially heat treated to relieve manufacturing residual stresses and then proof loaded at levels ranging from 0 to 82 percent of its break strength. Tests were performed at two different mean loads and four different load amplitudes. Failure site trends are noted as a function of applied loading and are correlated with results of a finite element stress analysis. Residual stresses are estimated using strains measured from strain gages placed at critical locations on individual links during the proof load operation. Residual stress estimates are used with standard fatigue damage parameters to estimate the fatigue life of the chain and predictions are compared to data. Proof loading was shown to substantially increase the fatigue life of the chain. Residual stresses can explain the increase in fatigue life. Neuber’s rule demonstrated the ability to model the data trends.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effect of Proof Loading on the Fatigue Behavior of Open Link Chain
dc.typeJournal Paper
dc.journal.volume114
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904136
dc.journal.fristpage27
dc.journal.lastpage33
dc.identifier.eissn1528-8889
dc.keywordsFatigue
dc.keywordsChain
dc.keywordsResidual stresses
dc.keywordsStress
dc.keywordsFatigue life
dc.keywordsFatigue strength
dc.keywordsFatigue testing
dc.keywordsStrain gages
dc.keywordsStress analysis (Engineering)
dc.keywordsHeat
dc.keywordsManufacturing
dc.keywordsFinite element analysis
dc.keywordsFailure AND Fatigue damage
dc.treeJournal of Engineering Materials and Technology:;1992:;volume( 114 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record