Show simple item record

dc.contributor.authorS. R. Swanson
dc.date.accessioned2017-05-08T23:38:36Z
dc.date.available2017-05-08T23:38:36Z
dc.date.copyrightJanuary, 1992
dc.date.issued1992
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26946#8_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/110348
dc.description.abstractCompression failure in fiber composites is of much interest, and is often a limiting factor in applications because of the lower compressive strength relative to tensile strength. In the present work a model for compression failure of fiber composite laminates is developed. This model is based on the assumption of fiber microbuckling similar to other models in the literature, but in addition includes the support offered by the plies in the overall laminate that are adjacent to the critical axial plies. The result is that the apparent strength of the axial plies depends on the total laminate layup. The model predictions are seen to be in reasonable agreement with recent experimental data. Initial fiber waviness is included and seen to be a dominant factor in the results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Micro-Mechanics Model for In-Situ Compression Strength of Fiber Composite Laminates
dc.typeJournal Paper
dc.journal.volume114
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904147
dc.journal.fristpage8
dc.journal.lastpage12
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsFibers
dc.keywordsLaminates
dc.keywordsMicromechanics (Engineering)
dc.keywordsCompressive strength
dc.keywordsCompression
dc.keywordsFailure AND Tensile strength
dc.treeJournal of Engineering Materials and Technology:;1992:;volume( 114 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record