Show simple item record

dc.contributor.authorH. Ishikawa
dc.contributor.authorK. Sasaki
dc.date.accessioned2017-05-08T23:38:35Z
dc.date.available2017-05-08T23:38:35Z
dc.date.copyrightApril, 1992
dc.date.issued1992
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26950#172_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/110337
dc.description.abstractIn order to study the applicability of the proposed hybrid constitutive model for cyclic plasticity to nonproportional loading, type 304 stainless-steel specimens subjected to sinusoidal loading that could change the degree of nonproportionality of the strain path were examined in detail. The subsequent yield surface during the loading was discussed in advance because the plastic deformation induced anisotropy coefficient tensor in the yield function had to be determined from the yield surface obtained by the experiment. From the experimental results, the subsequent yield surfaces during the loading could be assumed to be of the quadratic form of stress. The simulations based on the model gave a good description of the sinusoidal loading, irrespective of the degree of nonproportionality of the strain path.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleApplication of the Hybrid Constitutive Model for Cyclic Plasticity to Sinusoidal Loading
dc.typeJournal Paper
dc.journal.volume114
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904158
dc.journal.fristpage172
dc.journal.lastpage179
dc.identifier.eissn1528-8889
dc.keywordsPlasticity
dc.keywordsConstitutive equations
dc.keywordsEngineering simulation
dc.keywordsStainless steel
dc.keywordsDeformation
dc.keywordsStress
dc.keywordsAnisotropy AND Tensors
dc.treeJournal of Engineering Materials and Technology:;1992:;volume( 114 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record