Show simple item record

dc.contributor.authorG. M. Newaz
dc.contributor.authorB. S. Majumdar
dc.contributor.authorF. W. Brust
dc.date.accessioned2017-05-08T23:38:35Z
dc.date.available2017-05-08T23:38:35Z
dc.date.copyrightApril, 1992
dc.date.issued1992
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26950#156_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/110333
dc.description.abstractIn this study, thermal cycling response of quasi-isotropic metal-matrix composite (MMC) with a stacking sequence of [0/ ± 45/90]s was investigated. The thermal cycles were imposed between temperatures of 316–649° C. Metallography of the samples at the edge has shown the presence of fiber-matrix debonding and ply-to-ply separation (delamination) in the 45 and 90 deg plies. The propensity for debonding was found to be greater when fibers are too close in any of these plies. Both closed form elastic analysis and linear finite element analysis using temperature dependent material properties were undertaken to evaluate the criticality of local stresses and strains in the constituent materials. Inelastic deformation around fiber-matrix interface leading to cracking in the 90 deg ply was best simulated by higher local variation in fiber volume fraction in the composite and the presence of initial process induced defect.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThermal Cycling Response of Quasi-Isotropic Metal Matrix Composites
dc.typeJournal Paper
dc.journal.volume114
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904155
dc.journal.fristpage156
dc.journal.lastpage161
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsTemperature
dc.keywordsSeparation (Technology)
dc.keywordsMetals
dc.keywordsComposite materials
dc.keywordsFibers
dc.keywordsMetal matrix composites
dc.keywordsMetallography
dc.keywordsStress
dc.keywordsMaterials properties
dc.keywordsFinite element analysis
dc.keywordsFracture (Process)
dc.keywordsCycles
dc.keywordsDelamination AND Elastic analysis
dc.treeJournal of Engineering Materials and Technology:;1992:;volume( 114 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record