Show simple item record

dc.contributor.authorTadashi Hasebe
dc.contributor.authorMasao Sakane
dc.contributor.authorMasateru Ohnami
dc.date.accessioned2017-05-08T23:38:35Z
dc.date.available2017-05-08T23:38:35Z
dc.date.copyrightApril, 1992
dc.date.issued1992
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26950#141_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/110331
dc.description.abstractThis paper describes the elastic compliance matrix and Young’s modulus of directionally solidified (DS) plates which are composed of five columnar grains. Threedimensional finite element method analyses (FEM), taking account of the anisotropy of a crystal, were made to determine the elastic compliance matrix of the DS plate. The elastic compliance matrix calculated in the FEM analysis was reduced to an orthotropic matrix after giving an appropriate rotation of coordinates. The elastic compliance matrix calculated by Reuss and Voigt averages were compared with the FEM results. The two averages precisely estimated the FEM results but the Reuss model had a better accuracy. The Young’s modulus in any direction was discussed in both the coaxis and non-coaxis models.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleElastic Anisotropy of Directionally Solidified Superalloy
dc.typeJournal Paper
dc.journal.volume114
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904153
dc.journal.fristpage141
dc.journal.lastpage146
dc.identifier.eissn1528-8889
dc.keywordsSuperalloys
dc.keywordsAnisotropy
dc.keywordsFinite element model
dc.keywordsElasticity
dc.keywordsCrystals
dc.keywordsPlates (structures) AND Rotation
dc.treeJournal of Engineering Materials and Technology:;1992:;volume( 114 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record