Show simple item record

dc.contributor.authorS. O. Kasap
dc.contributor.authorS. Yannacopoulos
dc.contributor.authorV. Mirchandani
dc.contributor.authorJ. R. Hildebrandt
dc.date.accessioned2017-05-08T23:38:34Z
dc.date.available2017-05-08T23:38:34Z
dc.date.copyrightApril, 1992
dc.date.issued1992
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26950#132_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/110329
dc.description.abstractResults are presented on the evaluation of thermally fatigued E-glass composite specimens using ultrasonic techniques. The changes of the acoustic velocity and the attenuation coefficient in the ultrasonic range have been examined as a function of accumulated damage in various thermally fatigued composites. Three types of E-glass fiber reinforced composites have been used in this study having the following fiberglass weaves: (a) randomly oriented short fiber, (b) uniaxial fiber mat with continuous fiber bundles, (c) bidirectional continuous glass fiber mat. Representative specimens were subjected to thermal fatigue by thermal cycling between 25°C and 75°C. The structural integrity of these specimens was evaluated by determining the flexural strength after a number of thermal cycles via three point bending tests. It was observed that both the acoustic velocity and the flexural strength decreased whereas the ultrasonic attenuation increased with the number of thermal cycles which have been attributed to an accumulation of defects in the material and especially to debonding at the fiber-matrix interface. It has been observed that the use of ultrasonics may be very appropriate in evaluating composites in service since a good correlation has been noted between changes in the flexural strength, acoustic velocity and the attenuation coefficient in thermally fatigued composites.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleUltrasonic Evaluation of Thermal Fatigue of Composites
dc.typeJournal Paper
dc.journal.volume114
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904151
dc.journal.fristpage132
dc.journal.lastpage136
dc.identifier.eissn1528-8889
dc.keywordsFatigue
dc.keywordsComposite materials
dc.keywordsFibers
dc.keywordsAcoustics
dc.keywordsBending strength
dc.keywordsCycles
dc.keywordsGlass
dc.keywordsUltrasonics
dc.keywordsProduct quality
dc.keywordsGlass fibers
dc.keywordsFiber reinforced composites AND Glass reinforced plastics
dc.treeJournal of Engineering Materials and Technology:;1992:;volume( 114 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record