Show simple item record

dc.contributor.authorHong Lin
dc.contributor.authorR. M. N. Pelloux
dc.contributor.authorC. A. Berg
dc.contributor.authorHamid Nayeb-Hashemi
dc.date.accessioned2017-05-08T23:38:34Z
dc.date.available2017-05-08T23:38:34Z
dc.date.copyrightJuly, 1992
dc.date.issued1992
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26951#323_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/110326
dc.description.abstractAnisotropic cyclic stress-strain curves (CSSCs) were obtained from fully reversed cyclic tests in controlled strain on two orientations of specimens made from an Al-6061-T6 plate (along the rolling direction and perpendicular to the rolling direction). The experiments were conducted at room temperature under three loading conditions: tension/compression, pure torsion and combined tension/torsion in-phase. Based on the CSSCs data, the anisotropic constitutive relations of the material were obtained using Hill’s anisotropic plasticity theory. The coefficients in the yield function were evaluated with a 0.2 percent effective plastic strain criterion. Yield loci and flow behavior were determined for tension/torsion biaxial loading and compared to theoretical predictions. Two anisotropic effective stress-effective strain criteria obtained from the anisotropic constitutive relations were evaluated. A Von Mises type criterion correlated very well with the test data of all specimens under all loadings. The Tresca type criterion did not correlate with the test data.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCyclic Deformation and Anisotropic Constitutive Relations of Al-6061-T6 Under Biaxial Loading
dc.typeJournal Paper
dc.journal.volume114
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904180
dc.journal.fristpage323
dc.journal.lastpage330
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsConstitutive equations
dc.keywordsTorsion
dc.keywordsTension
dc.keywordsStress-strain curves
dc.keywordsCompression
dc.keywordsTemperature
dc.keywordsStress
dc.keywordsFlow (Dynamics) AND Plasticity
dc.treeJournal of Engineering Materials and Technology:;1992:;volume( 114 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record