Show simple item record

dc.contributor.authorTze-jer Chuang
dc.contributor.authorZheng-Dong Wang
dc.contributor.authorDongdi Wu
dc.date.accessioned2017-05-08T23:38:34Z
dc.date.available2017-05-08T23:38:34Z
dc.date.copyrightJuly, 1992
dc.date.issued1992
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26951#311_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/110323
dc.description.abstractThe long-term creep deformation of a siliconized silicon carbide ceramic C-ring subjected to a compression load at 1300°C in air is studied by the finite element method. Based on asymmetric creep responses observed under uniaxial creep tests, multidirectional constitutive equations in power-law form are derived using the parameters of effective stress/strain. The elastic solutions are first solved and used as a guide to reach the final mesh design and as initial conditions. Solving the initial value problem in which equilibrium and constitutive equations are satisfied at all times, this model gives time-history of stresses and displacements. Fair agreements were obtained in load-point displacement rate, damage zone, neutral axis locations, stress relaxation and redistribution when compared with simple curved beam theory and experimental data. As common with other nonlinear problems, the convergence of the finite element solutions strongly depends on the time step as well as the finess of the element size, particularly at the regions where principal stresses are close to the threshold stress for creep damage.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalysis of Creep in a Si-SiC C-Ring by Finite Element Method
dc.typeJournal Paper
dc.journal.volume114
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904178
dc.journal.fristpage311
dc.journal.lastpage316
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsFinite element methods
dc.keywordsStress
dc.keywordsConstitutive equations
dc.keywordsDesign
dc.keywordsFinite element analysis
dc.keywordsCompression
dc.keywordsDisplacement
dc.keywordsSilicon carbide ceramics
dc.keywordsEquilibrium (Physics) AND Relaxation (Physics)
dc.treeJournal of Engineering Materials and Technology:;1992:;volume( 114 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record