Show simple item record

dc.contributor.authorS. Lee
dc.contributor.authorJ. Wadsworth
dc.contributor.authorO. D. Sherby
dc.date.accessioned2017-05-08T23:38:34Z
dc.date.available2017-05-08T23:38:34Z
dc.date.copyrightJuly, 1992
dc.date.issued1992
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26951#278_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/110318
dc.description.abstractA laminated composite consisting of an ultrahigh carbon steel (UHCS) and an 8Ni-2Si iron interleaf material can be selectively heat treated without carbon diffusion between adjacent layers. This desirable attribute leads to a low ductile-brittle transition temperature (DBTT) of about 163K ( − 110°C) after selective heat treatment. This result is a consequence of notch blunting from the presence of the sharp interlayer boundary and the tough interleaf material. Based on Charpy notch impact results of selectively heat-treated UHCS composites containing 8Ni-2Si iron and other interleaf materials, it is concluded that the DBTT is principally a function of the notch-toughness of the interleaf material.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleImpact Properties of a Laminated Composite Based on Ultrahigh Carbon Steel and a Ni-Si-Steel
dc.typeJournal Paper
dc.journal.volume114
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904173
dc.journal.fristpage278
dc.journal.lastpage281
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsSteel
dc.keywordsCarbon steel
dc.keywordsHeat
dc.keywordsIron
dc.keywordsToughness
dc.keywordsTemperature
dc.keywordsDiffusion (Physics)
dc.keywordsHeat treating (Metalworking)
dc.keywordsCarbon AND Ductile-brittle transition
dc.treeJournal of Engineering Materials and Technology:;1992:;volume( 114 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record