Show simple item record

dc.contributor.authorLiu Yongning
dc.contributor.authorP. S. Follansbee
dc.contributor.authorZhu Jinhua
dc.contributor.authorZhou Huijiu
dc.date.accessioned2017-05-08T23:38:31Z
dc.date.available2017-05-08T23:38:31Z
dc.date.copyrightOctober, 1992
dc.date.issued1992
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26953#348_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/110292
dc.description.abstractThis paper presents an experimental study of the strain-rate and temperature dependence of the yield stress for three low carbon steels (percent c = 0.2, 0.3, and 0.4). Tension test results using notched specimens are reported for temperatures of −20°C, 0°C, and 25°C and strain rates from 10−4 s−1 to 200 s−1 . Two regions with different kinetics have been observed. The yield stress shows a low sensitivity to strain-rate at higher temperatures and lower strain rates (region I), but the rate sensitivity is high at lower temperatures and higher strain rates (region II). An approximately linear dependence of yield stress on log strain rate is displayed in both regions. The carbon content of the steel strongly affects strengthening in region I, but weakening appears as the strain rate increases in region II. Deformation in the two regions is analyzed according to standard formalisms. When the yield stress is separated into athermal and thermally activated components, the carbon concentration dependence is shown to isolate to the athermal stress component, which becomes rate controlling at high temperatures and low strain rates.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleVariation of Yield Stress With Strain Rate for Three Carbon Steels
dc.typeJournal Paper
dc.journal.volume114
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904184
dc.journal.fristpage348
dc.journal.lastpage353
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsCarbon
dc.keywordsYield stress
dc.keywordsTemperature
dc.keywordsDeformation
dc.keywordsStress
dc.keywordsHigh temperature AND Tension
dc.treeJournal of Engineering Materials and Technology:;1992:;volume( 114 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record