Show simple item record

dc.contributor.authorD. P. Chase
dc.contributor.authorE. F. Rybicki
dc.contributor.authorJ. R. Shadley
dc.date.accessioned2017-05-08T23:38:14Z
dc.date.available2017-05-08T23:38:14Z
dc.date.copyrightMarch, 1992
dc.date.issued1992
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26441#54_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/110150
dc.description.abstractAs part of a combined experimental and computational study of erosion for gas and oil production conditions, a semi-empirical model has been developed to predict erosion ratio behaviors of metals due to solid particle impingement. One use of the model will be to reduce the total number of experiments needed to characterize erosion behavior. The model represents material property information associated with both the target material and the impinging particles, as well as impingement speed. Five different models are examined in terms of ability to predict erosion ratio behavior as a function of impingement speed. The model selected is based on a conservation of energy formulation and fracture mechanics considerations to predict the amount of material removed due to solid particle impingement. The resulting equation to predict the erosion ratio for a given particle size contains one unknown coefficient which is determined through comparison with experimental data. Illustrative examples are presented for data for two different sizes of glass bead solid particles in an oil carrier fluid impinging on an API (American Petroleum Institute) N80 grade steel target at an impingement angle 90 deg to the target surface. Using erosion data at one impingement speed to determine the unknown coefficient, the model was used to predict erosion behavior at a range of other speeds. Good agreement between the erosion ratio data and the values predicted by the model were found for two solid particle sizes. Recommendations for expanding the capabilities of the model are pointed out.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Model for the Effect of Velocity on Erosion of N80 Steel Tubing due to the Normal Impingement of Solid Particles
dc.typeJournal Paper
dc.journal.volume114
dc.journal.issue1
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2905921
dc.journal.fristpage54
dc.journal.lastpage64
dc.identifier.eissn1528-8994
dc.keywordsSteel
dc.keywordsParticulate matter
dc.keywordsTubing
dc.keywordsErosion
dc.keywordsAmerican Petroleum Institute
dc.keywordsEquations
dc.keywordsParticle size
dc.keywordsMaterials properties
dc.keywordsEnergy conservation
dc.keywordsGlass beads
dc.keywordsFracture mechanics
dc.keywordsFluids AND Metals
dc.treeJournal of Energy Resources Technology:;1992:;volume( 114 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record