Show simple item record

dc.contributor.authorA. Fafitis
dc.contributor.authorM. P. Divakar
dc.date.accessioned2017-05-08T23:38:12Z
dc.date.available2017-05-08T23:38:12Z
dc.date.copyrightSeptember, 1992
dc.date.issued1992
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26446#235_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/110129
dc.description.abstractA new constitutive model for interface shear in concrete is presented. The composite is treated as a single-phase medium with no distinction in the strength difference between the matrix and the inclusions. The model consists of an assemblage of springs and a triangular asperity as a statistically equivalent replacement of the rough crack surfaces. The constitutive model relates the normal and shearing stresses and displacements in terms of the interface strength, contact areas, the contact angle of the rough crack surface, and the crack closing pressure. Using the concepts of critical state soil mechanics, conditions were stipulated for dilation and contraction of the rough crack, in terms of the intensity of the applied constant normal stresses. The deformability of the asperity was mathematically described in terms of the initial angle of contact and a progression of this angle to a minimum by means of an exponential model. Using idealized test results, a mathematical model was developed for contact area as a function of the crack width and tangential displacement. The performance of the constitutive model was verified by predicting the experimental results. The comparisons appear to be very satisfactory.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Constitutive Model for Aggregate Interlock Shear Based on Micromechanics
dc.typeJournal Paper
dc.journal.volume114
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2905947
dc.journal.fristpage235
dc.journal.lastpage243
dc.identifier.eissn1528-8994
dc.keywordsMicromechanics (Engineering)
dc.keywordsShear (Mechanics)
dc.keywordsConstitutive equations
dc.keywordsFracture (Materials)
dc.keywordsSurface roughness
dc.keywordsStress
dc.keywordsSoil mechanics
dc.keywordsPressure
dc.keywordsComposite materials
dc.keywordsConcretes
dc.keywordsCritical points (Physics)
dc.keywordsDisplacement
dc.keywordsShearing AND Springs
dc.treeJournal of Energy Resources Technology:;1992:;volume( 114 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record