Show simple item record

dc.contributor.authorS. Misawa
dc.contributor.authorH. Karasawa
dc.date.accessioned2017-05-08T23:38:11Z
dc.date.available2017-05-08T23:38:11Z
dc.date.copyrightDecember, 1992
dc.date.issued1992
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26447#332_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/110116
dc.description.abstractIn order to develop polycrystalline diamond compact (PDC) bits of about 8-1/2 in. in diameter which are able to drill geothermal wells, we have conducted the investigation with respect to the structure of a PDC cutter and rake angles, etc., by means of fundamental laboratory and field tests. New PDC core bits of 8-15/32 in. diameter were designed and manufactured based on the results of these tests. Then, field tests using them were carried out in geothermal wells at Hijiori in Yamagata prefecture, Hot Dry Rock project site in Japan, on September 1989 and October 1990. It became clear that the new PDC core bit can be sufficiently applied to the drilling of heterogeneous hot-hard rock formations from the tests.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDevelopment of New PDC Bits for Drilling of Geothermal Wells—Part 2: Field Testing
dc.typeJournal Paper
dc.journal.volume114
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2905961
dc.journal.fristpage332
dc.journal.lastpage338
dc.identifier.eissn1528-8994
dc.keywordsDrilling
dc.keywordsGeothermal engineering
dc.keywordsTesting
dc.keywordsWells
dc.keywordsPolycrystalline diamond compact bits
dc.keywordsRocks
dc.keywordsDrills (Tools) AND Diamonds
dc.treeJournal of Energy Resources Technology:;1992:;volume( 114 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record