Show simple item record

dc.contributor.authorH. Karasawa
dc.contributor.authorS. Misawa
dc.date.accessioned2017-05-08T23:38:11Z
dc.date.available2017-05-08T23:38:11Z
dc.date.copyrightDecember, 1992
dc.date.issued1992
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26447#323_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/110115
dc.description.abstractRock cutting, drilling and durability tests were conducted in order to obtain data to design polycrystalline diamond compact (PDC) bits for geothermal well drilling. Both conventional and new PDC bits with different rake angles were tested. The rock cutting tests revealed that cutting forces were minimized at −10 deg rake angle independent of rock type. In drilling and durability tests, a bit with backrake and siderake angles of −10 or −15 deg showed better performance concerning the penetration rate and the cutter strength. The new PDC bit exhibited better performance as compared to the conventional one, especially in hard rock drilling. Furthermore, a new PDC core bit (98.4 mm o. d., 66 mm i. d.) with eight cutters could be successfully applied to granite drilling equally as well as a bit with twelve cutters.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDevelopment of New PDC Bits for Drilling of Geothermal Wells—Part 1: Laboratory Testing
dc.typeJournal Paper
dc.journal.volume114
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2905960
dc.journal.fristpage323
dc.journal.lastpage331
dc.identifier.eissn1528-8994
dc.keywordsWells
dc.keywordsDrilling
dc.keywordsGeothermal engineering
dc.keywordsTesting
dc.keywordsPolycrystalline diamond compact bits
dc.keywordsRocks
dc.keywordsCutting
dc.keywordsDurability
dc.keywordsForce
dc.keywordsDiamonds AND Design
dc.treeJournal of Energy Resources Technology:;1992:;volume( 114 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record