Show simple item record

dc.contributor.authorJ. L. Desjardins
dc.contributor.authorR. Bell
dc.contributor.authorJ. C. Thompson
dc.contributor.authorD. J. Burns
dc.date.accessioned2017-05-08T23:36:25Z
dc.date.available2017-05-08T23:36:25Z
dc.date.copyrightFebruary, 1991
dc.date.issued1991
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28324#22_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/109088
dc.description.abstractFinite elements and two-dimensional photoelasticity have been used to analyze thick-walled cylinders which contain arrays of straight-fronted, longitudinal-radial cracks of unequal depth. The stress intensity factor K1 has been computed for the dominant crack and for some of the surrounding cracks. Cylinders with 2, 4, 6, 8, 16, 36 and 40 cracks have been considered. Good agreement has been obtained between the experimental and the numerical results and, for cylinders with 2 or 4 cracks, with previously published predictions. The results for all of the foregoing cases are used to develop simple, approximate techniques for estimating K1 for the dominant crack, when the total number of cracks is different from those that have been considered herein. Estimates of K1 obtained by these techniques agree well with corresponding finite element results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStress Intensity Factors for Unequal Longitudinal-Radial Cracks in Thick-Walled Cylinders
dc.typeJournal Paper
dc.journal.volume113
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2928723
dc.journal.fristpage22
dc.journal.lastpage27
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsCylinders AND Finite element analysis
dc.treeJournal of Pressure Vessel Technology:;1991:;volume( 113 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record