Show simple item record

dc.contributor.authorG. M. Wilkowski
dc.date.accessioned2017-05-08T23:36:23Z
dc.date.available2017-05-08T23:36:23Z
dc.date.copyrightMay, 1991
dc.date.issued1991
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28326#154_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/109058
dc.description.abstractThis paper summarizes various cases where anisotropic fracture toughness properties caused the failure mode to change during ductile fracture experiments on piping. It is noted that in particular for carbon steel piping, the anisotropy can cause an initial circumferential crack to propagate in a helical or even axial direction, even though there are only applied bending loads. This has implications that under combined loading, such pipes may have lower longitudinal stresses at failure than may be calculated by a leak-before-break analysis that only considers the longitudinal stresses and the toughness in the circumferential crack growth plane.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnisotropic Fracture Toughness Effects on Failure Modes of Piping
dc.typeJournal Paper
dc.journal.volume113
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2928740
dc.journal.fristpage154
dc.journal.lastpage158
dc.identifier.eissn1528-8978
dc.keywordsPipes
dc.keywordsFailure
dc.keywordsFracture toughness
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsCarbon steel
dc.keywordsAnisotropy
dc.keywordsToughness
dc.keywordsDuctile fracture AND Leak-before-break
dc.treeJournal of Pressure Vessel Technology:;1991:;volume( 113 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record