Show simple item record

dc.contributor.authorK. Boudjelida
dc.contributor.authorA. H. Ghosn
dc.contributor.authorM. Sabbaghian
dc.date.accessioned2017-05-08T23:36:21Z
dc.date.available2017-05-08T23:36:21Z
dc.date.copyrightAugust, 1991
dc.date.issued1991
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28329#459_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/109047
dc.description.abstractThe prestresses in the walls of multilayered weld-wrapped cylindrical pressure vessels are mainly created by the transverse shrinkage of the welded layers. Current design practices consider only the shrinkage of longitudinal weld seams, resulting from constant temperature gradients. Such practices ignore the contribution to shrinkage from the remaining part of the welded plate and would, therefore, yield approximate values for the corresponding prestresses. In the present work the shrinkage of the full layer is determined, and hence a more accurate method for predicting the weld wrapping stresses is offered. The heat transfer problem during welding is addressed and modeled. A three-dimensional heat conduction problem with a heat source traveling at constant speed is formulated and solved. Using Green’s function, the transient temperature distribution is determined. A two-dimensional model is also employed, and the corresponding temperature solution is obtained. A numerical example for the two-dimensional model is worked out for a single welded layer. Comparison between the value of the layer shrinkage calculated by the method described in this paper (variable layer temperature) and that obtained by the current industry method (constant temperature gradient) shows that the latter yields a higher (more conservative) value, and hence will underpredict the prestresses in the layer and the vessel.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA More Accurate Method for Predicting the Prestresses in a Multilayer Wrapped Cylindrical Vessel
dc.typeJournal Paper
dc.journal.volume113
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2928781
dc.journal.fristpage459
dc.journal.lastpage464
dc.identifier.eissn1528-8978
dc.keywordsVessels
dc.keywordsShrinkage (Materials)
dc.keywordsTemperature
dc.keywordsTemperature gradients
dc.keywordsHeat
dc.keywordsHeat transfer
dc.keywordsWelding
dc.keywordsHeat conduction
dc.keywordsPressure vessels
dc.keywordsStress
dc.keywordsDesign
dc.keywordsTemperature distribution AND Travel
dc.treeJournal of Pressure Vessel Technology:;1991:;volume( 113 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record