Show simple item record

dc.contributor.authorR. Peek
dc.contributor.authorM. El-Bkaily
dc.date.accessioned2017-05-08T23:36:21Z
dc.date.available2017-05-08T23:36:21Z
dc.date.copyrightAugust, 1991
dc.date.issued1991
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28329#423_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/109042
dc.description.abstractA simplified approach is described for determining the extent of plastic buckling of the tank wall near the base (elephant’s foot bulging) for ground-supported unanchored liquid storage tanks subjected to seismic overturning moments. The method is applied to a 100-ft diameter and 40-ft high tank with a roof. Results show that the ultimate seismic overturning moment that can be withstood by the tank is 31 percent higher than the overturning moment at which elephant’s foot bulging begins. The reason for this is redistribution of vertical compressive stresses in the tank wall: initially these vertical compressive stresses are concentrated over a small contact length. However, as the elephant’s foot bulge develops, the size of the contact length increases, resulting in a more favorable distribution of stresses.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePostbuckling Behavior of Unanchored Steel Tanks Under Lateral Loads
dc.typeJournal Paper
dc.journal.volume113
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2928777
dc.journal.fristpage423
dc.journal.lastpage428
dc.identifier.eissn1528-8978
dc.keywordsSteel
dc.keywordsStress
dc.keywordsCompressive stress
dc.keywordsRoofs
dc.keywordsStorage tanks AND Buckling
dc.treeJournal of Pressure Vessel Technology:;1991:;volume( 113 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record