Show simple item record

dc.contributor.authorC. W. Marschall
dc.contributor.authorG. M. Wilkowski
dc.date.accessioned2017-05-08T23:36:19Z
dc.date.available2017-05-08T23:36:19Z
dc.date.copyrightAugust, 1991
dc.date.issued1991
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28329#358_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/109031
dc.description.abstractThe influence of cyclic loading on ductile fracture toughness was examined from limited experimental data available in the literature. The review indicated that, in the absence of global compressive loads during the unloading cycle (R ≥ 0), the total crack extension generally is the sum of the monotonic component (Δa mono ) and the cyclic component (Δa cyclic ). The former can be obtained from the monotonic J-R curve and the latter from a fatigue-crack-growth curve. When large global compressive loads are developed during unloading (R <0), the review indicated that simply summing Δa mono and Δa cyclic gives an under prediction of the actual crack extension in load cycling tests. Thus, it appears that the local compressive strains lower a material’s normal monotonic fracture resistance in a region immediately ahead of the crack following the load reversal. Although few data are available in this regime of cyclic loading, it is likely that the magnitude of the loss of monotonic toughness depends on frequency of unloadings, R -ratio, and material. For ferritic steels susceptible to strain aging, temperature and strain rate also are likely to be important. The review also examined the applicability of various fracture mechanics parameters, including those based on deformation plasticity and those based on incremental plasticity, in quantifying cyclic-loading effects. While incremental plasticity parameters (for example T *) appear promising, they may be time-consuming and costly to develop. Until such advanced parameters are available, it is likely that empirical correlations involving deformation J will have to be developed to handle cyclic loading effects. Finally, the significance of the findings reported herein relative to the performance of flawed nuclear piping subjected to cyclic loading is discussed. It appears that circumferential cracks are of greater concern in seismic events than are axial cracks because the former may experience negative R -ratios.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Cyclic Loading on Ductile Fracture Resistance
dc.typeJournal Paper
dc.journal.volume113
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2928767
dc.journal.fristpage358
dc.journal.lastpage367
dc.identifier.eissn1528-8978
dc.keywordsElectrical resistance
dc.keywordsDuctile fracture
dc.keywordsStress
dc.keywordsPlasticity
dc.keywordsDeformation
dc.keywordsToughness
dc.keywordsFracture mechanics
dc.keywordsFatigue
dc.keywordsTemperature
dc.keywordsSteel
dc.keywordsFracture (Process)
dc.keywordsPipes
dc.keywordsCycles AND Earthquakes
dc.treeJournal of Pressure Vessel Technology:;1991:;volume( 113 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record