Show simple item record

dc.contributor.authorF. Ellyin
dc.contributor.authorK. Golos
dc.contributor.authorZ. Xia
dc.date.accessioned2017-05-08T23:35:43Z
dc.date.available2017-05-08T23:35:43Z
dc.date.copyrightJanuary, 1991
dc.date.issued1991
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26940#112_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/108650
dc.description.abstractIn this investigation, thin-walled circular cylindrical specimens fabricated from a low alloy pressure vessel steel (ASTM A-516 Gr. 70) were subjected to various multiaxial loading conditions. The tests were conducted under strain-controlled condition, and loading was provided through an axial actuator and internal and external pressure across the specimen wall. Four in-plane strain ratios (ρ = Δεt /Δεa ) were tested, and the most damaging case was the equi-biaxial in-plane straining, ρ = 1. For the latter condition, 90 deg out-of-phase loading was also investigated. These tests indicated a dramatic decrease in the number of cycles to failure, N f , as a result of out-of-phase loading. The influence of the plastic strain path on life is thus clearly demonstrated. It is shown that the total strain energy density, ΔW t = ΔW e+ + ΔW p , correlates with both the in-phase and out-of-phase cyclic tests, and therefore is a proper damage parameter to be used for life predictions. A brief description of how ΔW t can be calculated is given for the case of proportional loading. The predicted results are compared with the experimental data, and the agreement is found to be very good indeed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleIn-Phase and Out-of-Phase Multiaxial Fatigue
dc.typeJournal Paper
dc.journal.volume113
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903365
dc.journal.fristpage112
dc.journal.lastpage118
dc.identifier.eissn1528-8889
dc.keywordsDensity
dc.keywordsFatigue
dc.keywordsAlloys
dc.keywordsSteel
dc.keywordsPressure vessels
dc.keywordsActuators
dc.keywordsCycles
dc.keywordsExternal pressure
dc.keywordsFailure AND ASTM International
dc.treeJournal of Engineering Materials and Technology:;1991:;volume( 113 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record