Show simple item record

dc.contributor.authorSung-Lim Ko
dc.contributor.authorDavid A. Dornfeld
dc.date.accessioned2017-05-08T23:35:42Z
dc.date.available2017-05-08T23:35:42Z
dc.date.copyrightJanuary, 1991
dc.date.issued1991
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26940#75_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/108644
dc.description.abstractA quantitative model of burr formation for ductile materials which does not include fracture during orthogonal machining is proposed. The burr formation mechanism is divided into three parts—initiation, development, and formation of the burr with appropriate assumptions. The mechanisms proposed are based on the observation of the behavior of workpiece material during orthogonal machining on commercial plasticine. To validate the model, orthogonal machining inside a scanning electron microscope at low speed was done with a copper workpiece and A16061-T6, A12024-T4 and A1390 were cut on a modified milling machine over a range of cutting speeds.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Study on Burr Formation Mechanism
dc.typeJournal Paper
dc.journal.volume113
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903385
dc.journal.fristpage75
dc.journal.lastpage87
dc.identifier.eissn1528-8889
dc.keywordsMechanisms
dc.keywordsMachining
dc.keywordsScanning electron microscopes
dc.keywordsFracture (Process)
dc.keywordsCutting
dc.keywordsMilling machines AND Copper
dc.treeJournal of Engineering Materials and Technology:;1991:;volume( 113 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record