Show simple item record

dc.contributor.authorW. N. Sharpe
dc.contributor.authorK. C. Wang
dc.date.accessioned2017-05-08T23:35:42Z
dc.date.available2017-05-08T23:35:42Z
dc.date.copyrightJanuary, 1991
dc.date.issued1991
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26940#1_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/108635
dc.description.abstractIt has been proposed in the literature that the Neuber relation be modified to read Kε/Kt × (Kσ/Kt)m = 1 in order to improve its predictive capability when plane strain loading conditions exist. K ε , K σ , and K t are respectively the strain, stress, and elastic concentration factors. The exponent m is proposed to be 1 for plane stress and 0 for plane strain. This paper reports the results of biaxial notch root strain measurements on three sets of double-notched aluminum specimens that have different thicknesses and root radiuses. Elastoplastic strains are measured over gage lengths as short as 150 micrometers with a laser-based in-plane interferometric technique. The measured strains are used to compute K ε directly and K σ using the uniaxial stress-strain curve. The exponent m can then be determined for each amount of constraint. The amount of constraint is defined as the negative ratio of lateral to longitudinal strain at the notch root and determined from elastic finite element analyses. As this ratio decreases for the three cases, the values of m are found to be 0.65, 0.48, and 0.36. The modified Neuber relation is an improvement, but discrepancies still exist when plastic yielding begins at the notch root.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEvaluation of a Modified Monotonic Neuber Relation
dc.typeJournal Paper
dc.journal.volume113
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903378
dc.journal.fristpage1
dc.journal.lastpage8
dc.identifier.eissn1528-8889
dc.keywordsAluminum
dc.keywordsLasers
dc.keywordsGages
dc.keywordsInterferometry
dc.keywordsStress
dc.keywordsStress-strain curves
dc.keywordsFinite element analysis
dc.keywordsPlane strain AND Strain measurement
dc.treeJournal of Engineering Materials and Technology:;1991:;volume( 113 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record