Show simple item record

dc.contributor.authorM. Sakane
dc.contributor.authorM. Sawada
dc.contributor.authorM. Ohnami
dc.date.accessioned2017-05-08T23:35:41Z
dc.date.available2017-05-08T23:35:41Z
dc.date.copyrightApril, 1991
dc.date.issued1991
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26942#244_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/108629
dc.description.abstractThis paper describes the biaxial low cycle fatigue of unaged and aged 1Cr-1Mo-1/4V rotor steels at 823 K in air. Combined push-pull and reversed torsion tests were carried out on these steels and the biaxial fatigue data were obtained. Aging significantly reduced the hardness of the steel but had no effect on the crack direction in biaxial low cycle fatigue. Aging also had no effect on the data correlation using the biaxial strain parameters, but had a significant effect on the data correlation using the biaxial stress parameters. The change in the effective stress parameter in correlating the biaxial fatigue data due to aging is discussed in connection with the material softening.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleBiaxial Low Cycle Fatigue of Unaged and Aged 1Cr-1Mo-1/4V Steels at Elevated Temperature
dc.typeJournal Paper
dc.journal.volume113
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903399
dc.journal.fristpage244
dc.journal.lastpage253
dc.identifier.eissn1528-8889
dc.keywordsTemperature
dc.keywordsSteel
dc.keywordsLow cycle fatigue
dc.keywordsFatigue
dc.keywordsStress
dc.keywordsTorsion
dc.keywordsFracture (Materials) AND Rotors
dc.treeJournal of Engineering Materials and Technology:;1991:;volume( 113 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record