Show simple item record

dc.contributor.authorW. Cheng
dc.contributor.authorÖ. Vardar
dc.contributor.authorI. Finnie
dc.date.accessioned2017-05-08T23:35:41Z
dc.date.available2017-05-08T23:35:41Z
dc.date.copyrightApril, 1991
dc.date.issued1991
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26942#199_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/108621
dc.description.abstractThe use of thin cuts for residual stress measurement is referred to as the crack compliance method. A computational model is presented for the determination of normal and shear residual stresses near the surface by introducing shallow cuts. The optimum regions for strain measurement are obtained. This method is shown to be considerably more sensitive than the conventional hole drilling method and is capable of measuring residual stresses which vary with depth below the surface.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMeasurement of Residual Stresses Near the Surface Using the Crack Compliance Method
dc.typeJournal Paper
dc.journal.volume113
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903392
dc.journal.fristpage199
dc.journal.lastpage204
dc.identifier.eissn1528-8889
dc.keywordsResidual stresses
dc.keywordsFracture (Materials)
dc.keywordsStrain measurement
dc.keywordsStress
dc.keywordsShear (Mechanics) AND Drilling
dc.treeJournal of Engineering Materials and Technology:;1991:;volume( 113 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record