Show simple item record

dc.contributor.authorK. Mallick
dc.contributor.authorShyam K. Samanta
dc.contributor.authorA. Kumar
dc.date.accessioned2017-05-08T23:35:40Z
dc.date.available2017-05-08T23:35:40Z
dc.date.copyrightApril, 1991
dc.date.issued1991
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26942#192_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/108620
dc.description.abstractThis paper presents a set of experimental results concerning the evolution of yield loci for anisotropic materials in the course of finite shear deformation history. Thin walled tubes of SAE 1020 steel are tested under triaxial loading conditions – tension, torsion and internal pressure, at room temperature. The specimens were prepared from cold-drawn tubes which had a prominent fibrous grain structure. They showed considerable amount of in-plane anisotropy and orthotropic yield properties with respect to the longitudinal and circumferential axes. The as-received specimens were further pre-strained by imposing simple shear which causes the change in orientations of these elongated polycrystalline grains. Our previous experimental results [1] have verified that the principal directions of the total stretch of the current grain shape match with the directions of orthotropy, and in this work, the subsequent yield loci for the pre-strained material are determined with respect to the new reference frame fixed along these directions of orthotropic symmetry. By utilizing the unique triaxial loading scheme of our servo-hydraulic testing system it has been possible to create the principal directions of a biaxial state of stress in a specified direction. The changes in the size and shape of the yield loci in the stress space are critically analyzed in this paper.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Experimental Study of the Evolution of Yield Loci for Anisotropic Materials Subjected to Finite Shear Deformation
dc.typeJournal Paper
dc.journal.volume113
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903391
dc.journal.fristpage192
dc.journal.lastpage198
dc.identifier.eissn1528-8889
dc.keywordsShear deformation
dc.keywordsShapes
dc.keywordsStress
dc.keywordsStructural frames
dc.keywordsAnisotropy
dc.keywordsShear (Mechanics)
dc.keywordsTorsion
dc.keywordsTesting
dc.keywordsPressure
dc.keywordsTemperature
dc.keywordsSteel
dc.keywordsServomechanisms AND Tension
dc.treeJournal of Engineering Materials and Technology:;1991:;volume( 113 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record