Show simple item record

dc.contributor.authorMohamed Hashish
dc.date.accessioned2017-05-08T23:35:40Z
dc.date.available2017-05-08T23:35:40Z
dc.date.copyrightJuly, 1991
dc.date.issued1991
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26943#354_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/108618
dc.description.abstractThe general characteristics of surfaces machined with abrasive-waterjets (AWJs) are discussed in terms of surface texture and surface integrity. Data are presented from several studies involving different machining operations, including cutting, milling, turning, and drilling, and various advanced materials. The effects of AWJ parameters on surface texture effects, such as waviness, kerf taper, and burr height, in thin sheet metals typically used in the aerospace industry are presented and discussed. Other surface texture parameters, including surface finish and lay, are also addressed for selected machining applications such as milling and turning. Abrasive particle size is found to be the dominant parameter affecting the surface finish. The surface integrity effects are defined as particle deposition, delamination, gouging, microstructural changes, cracking, chipping, work hardening, and heataffected zones. Particle deposition occurs in the machining of ductile materials, but deposited particles can easily be removed by cleaning. Minor work hardening may result but can be totally eliminated if the dominant material removal mechanism is the cutting wear mode, which prevails under certain jet and traverse conditions. Thus, although the machining of advanced materials with AWJs may result in minor but controllable surface texture effects, it does not generally affect the integrity of the material.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCharacteristics of Surfaces Machined With Abrasive-Waterjets
dc.typeJournal Paper
dc.journal.volume113
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903418
dc.journal.fristpage354
dc.journal.lastpage362
dc.identifier.eissn1528-8889
dc.keywordsWear
dc.keywordsMachining
dc.keywordsParticulate matter
dc.keywordsDrilling
dc.keywordsAdvanced materials
dc.keywordsSheet metal
dc.keywordsFinishes
dc.keywordsAerospace industry
dc.keywordsFracture (Process)
dc.keywordsCutting
dc.keywordsMilling
dc.keywordsParticle size
dc.keywordsSurface texture
dc.keywordsWork hardening
dc.keywordsDelamination AND Mechanisms
dc.treeJournal of Engineering Materials and Technology:;1991:;volume( 113 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record