Show simple item record

dc.contributor.authorP. Tekriwal
dc.contributor.authorJ. Mazumder
dc.date.accessioned2017-05-08T23:35:40Z
dc.date.available2017-05-08T23:35:40Z
dc.date.copyrightJuly, 1991
dc.date.issued1991
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26943#336_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/108615
dc.description.abstractA three-dimensional transient thermomechanical analysis has been performed for the Gas Metal Arc Welding process using the finite element method. Because the heat generated due to elasto-visco-plastic straining in welding is negligible in comparison to the arc heat input, the thermomechanical analysis is uncoupled into two parts. The first part performs a three-dimensional transient heat transfer analysis and computes entire thermal history of the weldment. The second part then uses results of the first part and performs a three-dimensional transient thermo-elastoplastic analysis to compute transient and residual distortions, strains and stresses in the weld. The thermomechanical model incorporates all the thermophysical and mechanical properties of the material as functions of temperature. Boundary conditions used in the numerical simulation are quite general and are matched with the experiment carried out to measure transient strains in the mild steel (0.22 percent carbon steel) weld. Good qualitative agreement was achieved between calculated and measured transient strains.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTransient and Residual Thermal Strain-Stress Analysis of GMAW
dc.typeJournal Paper
dc.journal.volume113
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903415
dc.journal.fristpage336
dc.journal.lastpage343
dc.identifier.eissn1528-8889
dc.keywordsGas metal arc welding
dc.keywordsStress
dc.keywordsHeat
dc.keywordsTemperature
dc.keywordsSteel
dc.keywordsWelding
dc.keywordsComputer simulation
dc.keywordsCarbon steel
dc.keywordsMechanical properties
dc.keywordsBoundary-value problems
dc.keywordsFunctions
dc.keywordsTransient heat AND Finite element methods
dc.treeJournal of Engineering Materials and Technology:;1991:;volume( 113 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record