Show simple item record

dc.contributor.authorK. Y. Hour
dc.contributor.authorJ. F. Stubbins
dc.date.accessioned2017-05-08T23:35:39Z
dc.date.available2017-05-08T23:35:39Z
dc.date.copyrightJuly, 1991
dc.date.issued1991
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26943#271_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/108603
dc.description.abstractHigh temperature crack growth behavior is investigated over a wide range of R-ratios, frequencies, and temperatures in Alloy 800H. It is found that high R-ratio, low frequency, or high temperature can enhance creep damage and thus induce an intergranular crack growth mode. At low frequencies, the nonlinear fracture mechanics parameter, C*, is found to correlate time-dependent fatigue crack growth rate well if the applied mean stress is used in calculating C*. On the other hand, the Paris crack growth law using K eff is proven to be an adequate expression to use when fatigue (time-independent) damage dominates. These conclusions correlate well with damage mechanisms observed from sample fracture surfaces.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFatigue Crack Growth Behavior of Alloy 800H at Elevated Temperature
dc.typeJournal Paper
dc.journal.volume113
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903405
dc.journal.fristpage271
dc.journal.lastpage279
dc.identifier.eissn1528-8889
dc.keywordsTemperature
dc.keywordsAlloys
dc.keywordsFatigue cracks
dc.keywordsFrequency
dc.keywordsHigh temperature
dc.keywordsMechanisms
dc.keywordsIndium alloys
dc.keywordsCreep
dc.keywordsFracture mechanics
dc.keywordsFatigue
dc.keywordsStress AND Fracture (Process)
dc.treeJournal of Engineering Materials and Technology:;1991:;volume( 113 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record