Show simple item record

dc.contributor.authorT. Hisatsune
dc.contributor.authorT. Tabata
dc.contributor.authorS. Masaki
dc.date.accessioned2017-05-08T23:35:37Z
dc.date.available2017-05-08T23:35:37Z
dc.date.copyrightOctober, 1991
dc.date.issued1991
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26945#425_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/108594
dc.description.abstractAxisymmetric deformation of anisotropic porous materials caused by geometry of pores or by distribution of pores is analyzed. Two models of the materials are proposed: one consists of spherical cells each of which has a concentric ellipsoidal pore; and the other consists of ellipsoidal cells each of which has a concentric spherical pore. The velocity field in the matrix is assumed and the upper bound approach is attempted. Yield criteria are expressed as ellipses on the σm σ3 plane which are longer in longitudinal direction with increasing anisotropy and smaller with increasing volume fraction of the pore. Furthermore, the axes rotate about the origin at an angle α from the σm -axis, while the axis for isotropic porous materials is on the σm -axis.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Yield Criterion of Porous Materials With Anisotropy Caused by Geometry or Distribution of Pores
dc.typeJournal Paper
dc.journal.volume113
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904121
dc.journal.fristpage425
dc.journal.lastpage429
dc.identifier.eissn1528-8889
dc.keywordsPorous materials
dc.keywordsAnisotropy
dc.keywordsGeometry AND Deformation
dc.treeJournal of Engineering Materials and Technology:;1991:;volume( 113 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record