Show simple item record

dc.contributor.authorG. T. Mase
dc.date.accessioned2017-05-08T23:35:22Z
dc.date.available2017-05-08T23:35:22Z
dc.date.copyrightSeptember, 1991
dc.date.issued1991
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26439#189_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/108449
dc.description.abstractAn experimental test program is described in which biaxial failure envelopes were generated for unidirectional [0]8 and quasi-isotropic [0/+45/90/−45]s specimens made from Toray T800HY/3910 graphite/epoxy. Data was generated in all four quadrants of the biaxial stress plane. Fiber direction failure strengths were also found by uniaxial tension and compression tests. The quasi-isotropic compressive failure strengths are approximately 50 percent of the tensile strengths. Failure strengths in the tension-tension quadrant were essentially the same as previous tubular specimen tests made of a similar material (Swanson and Christoforou, 1986) indicating that free-edge and stress concentration effects may not preclude using flat cruciform specimens to generate biaxial failure data.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleBiaxial Characterization of Carbon/Epoxy Unidirectional and Quasi-Isotropic Composites
dc.typeJournal Paper
dc.journal.volume113
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2905803
dc.journal.fristpage189
dc.journal.lastpage192
dc.identifier.eissn1528-8994
dc.keywordsComposite materials
dc.keywordsEpoxy adhesives
dc.keywordsCarbon
dc.keywordsFailure
dc.keywordsTension
dc.keywordsFailure data
dc.keywordsGraphite
dc.keywordsCompression
dc.keywordsStress concentration
dc.keywordsFibers AND Stress
dc.treeJournal of Energy Resources Technology:;1991:;volume( 113 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record