Show simple item record

dc.contributor.authorM. Ueda
dc.contributor.authorT. Kano
dc.contributor.authorA. Yoshitoshi
dc.date.accessioned2017-05-08T23:33:32Z
dc.date.available2017-05-08T23:33:32Z
dc.date.copyrightFebruary, 1990
dc.date.issued1990
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28317#71_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/107433
dc.description.abstractA thermal ratcheting test was performed using an elbow model test specimen subjected to sustained primary load and cyclic thermal transient strains. Under severe loading conditions incremental longitudinal strains are observed in the region where a circumferential angle is around ± π/9 from the side of the elbow, while the elbow cross section was ovalized cycle by cycle causing large circumferential bending strain at around φ = π/2. It was shown by the test and analyses that the maximum primary membrane stress in an elbow is an essential parameter for thermal ratcheting behavior of elbows. Direct application of thermal ratcheting criteria in the ASME Code Case N-47 showed considerable conservative estimation and an improved thermal ratcheting criterion for elbows is recommended.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThermal Ratcheting Criteria and Behavior of Piping Elbows
dc.typeJournal Paper
dc.journal.volume112
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2928590
dc.journal.fristpage71
dc.journal.lastpage75
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsPipes
dc.keywordsCycles
dc.keywordsMembranes AND ASME Standards
dc.treeJournal of Pressure Vessel Technology:;1990:;volume( 112 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record