Show simple item record

dc.contributor.authorC. E. Jaske
dc.date.accessioned2017-05-08T23:33:29Z
dc.date.available2017-05-08T23:33:29Z
dc.date.copyrightFebruary, 1990
dc.date.issued1990
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28317#20_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/107425
dc.description.abstractA methodology for assessing the remaining life of hot reheat steam pipe with longitudinal flaws, such as those typically associated with the longitudinal seam welds, has been developed. The approach uses three levels of analysis. Level 1 employs handbook data, assumed flaw sizes, and design parameters. Level 2 employs handbook data, assumed flaw sizes, and actual operating parameters. Level 3 is tailored to a specific case and uses measured data, inspection results, and actual operating parameters. A computer code was developed to apply this approach to hot reheat steam pipe of 2-1/4Cr-1Mo and 1-1/4Cr-1/2Mo-Si steel. Using data from an EPRI survey (RP2596-7), the results of Level 1 analysis were found to predict the potential for creep damage and fracture and to correlate well with past experience, whereas the traditional lower-bound Larson-Miller approach was generally overly optimistic in predicting remaining service life. The approach predicts creep-crack-growth life and assesses the potential of rapid, unstable fracture occurring before a significant amount of leaking takes place. The usefulness of the methodology is illustrated by means of example analyses of a typical cases that might be expected in service. The parameters that were varied in these analyses include type of material (base metal or weld metal), pressure, temperature, pipe wall thickness, and initial flaw size. The approach provides a preliminary tool to help make inspection, operating, and replacement decisions; but additional work is required to validate it as a general tool.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLife Assessment of Hot Reheat Steam Pipe
dc.typeJournal Paper
dc.journal.volume112
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2928581
dc.journal.fristpage20
dc.journal.lastpage27
dc.identifier.eissn1528-8978
dc.keywordsPipes
dc.keywordsSteam
dc.keywordsFracture (Process)
dc.keywordsCreep
dc.keywordsInspection
dc.keywordsService life (Equipment)
dc.keywordsBase metals
dc.keywordsWelded joints
dc.keywordsDesign
dc.keywordsTemperature
dc.keywordsMetals
dc.keywordsSteel
dc.keywordsPressure
dc.keywordsComputers
dc.keywordsWall thickness AND Leakage
dc.treeJournal of Pressure Vessel Technology:;1990:;volume( 112 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail
This item appears in the following Collection(s)

Show simple item record