Show simple item record

dc.contributor.authorJ. Cheng
dc.contributor.authorJ. Qian
dc.date.accessioned2017-05-08T23:33:28Z
dc.date.available2017-05-08T23:33:28Z
dc.date.copyrightMay, 1990
dc.date.issued1990
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28319#164_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/107415
dc.description.abstractHourly pressure variations were recorded during six years in two synthetic towers, giving a total of 105,000 readings. The readings were converted into a 15-block pressure amplitude spectrum of 12,655 cycles following standard methods employed in the aircraft and automotive industries. The spectrum was applied to center-cracked tension specimens and crack growth rates were measured. The results show that the crack growth rate data can be plotted conservatively against the range of the equivalent stress intensity factor calculated as a root-mean-cube value. Futhermore, it is shown that the 9704 cycles of lowest 1.9 MPa pressure amplitude caused 12 percent of the cumulative fatigue damage, whereas the 13 start-up and shut-down cycles of highest 15.2 MPa amplitude caused 8.2 percent of the damage.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFatigue Crack Growth: A Case Study of Synthetic Tower Spectrum Loading
dc.typeJournal Paper
dc.journal.volume112
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2928603
dc.journal.fristpage164
dc.journal.lastpage168
dc.identifier.eissn1528-8978
dc.keywordsSpectra (Spectroscopy)
dc.keywordsFatigue cracks
dc.keywordsPressure
dc.keywordsCycles
dc.keywordsFracture (Materials)
dc.keywordsAircraft
dc.keywordsStress
dc.keywordsFatigue damage AND Tension
dc.treeJournal of Pressure Vessel Technology:;1990:;volume( 112 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record