Show simple item record

dc.contributor.authorM. D. Witherell
dc.contributor.authorM. A. Scavullo
dc.date.accessioned2017-05-08T23:33:25Z
dc.date.available2017-05-08T23:33:25Z
dc.date.copyrightNovember, 1990
dc.date.issued1990
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28323#397_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/107375
dc.description.abstractAn isotropic cylinder designed to have a specific bore displacement per unit of internal pressure can be made lighter by removing material from the outer diameter and replacing it with the correct amount of a stiff lightweight composite material. A stress solution is presented for an internally pressurized compound cylinder constructed from an isotropic liner jacketed with a cylindrically orthotropic composite material. The solution is used to determine the set of compound cylinder geometries which have equivalent bore hoop strain to that of an isotropic monoblock cylinder. An equation for predicting the equivalent compound cylinder geometry which provides the maximum possible weight savings over the isotropic design is also presented. To verify the theory, an experimental study was conducted involving the measurement of bore strain for internally pressurized steel liners jacketed with a graphite bismaleimide composite.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStress Analysis and Weight Savings of Internally Pressurized Composite-Jacketed Isotropic Cylinders
dc.typeJournal Paper
dc.journal.volume112
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929895
dc.journal.fristpage397
dc.journal.lastpage403
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;1990:;volume( 112 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record