Show simple item record

dc.contributor.authorJ. M. Goan
dc.contributor.authorM. A. Sutton
dc.contributor.authorY. J. Chao
dc.date.accessioned2017-05-08T23:33:25Z
dc.date.available2017-05-08T23:33:25Z
dc.date.copyrightNovember, 1990
dc.date.issued1990
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28323#353_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/107369
dc.description.abstractA baseline study has been carried out to assess the accuracy of the engineering approach for J -integral determination when applied to various standard specimens. Detailed finite element calculations were used to assess the accuracy of this approach. Although certain discrepancies were found when comparing the approximated functions obtained in this work to those in previous work, the error trends are similar and consistent throughout the analysis. Then, the engineering approach outlined in the baseline study is applied to the 2-D plane stress problem of a C-shaped specimen subjected to tension. Derivation of limit-load, fully plastic solutions and elastic-plastic estimation formulas are given in detail. Detailed comparisons between results from estimation solutions and finite element calculations are presented.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAssessment of the Engineering Approach for the Evaluation of C-Shaped Specimens
dc.typeJournal Paper
dc.journal.volume112
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929889
dc.journal.fristpage353
dc.journal.lastpage366
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;1990:;volume( 112 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record