Show simple item record

dc.contributor.authorK. H. Wu
dc.contributor.authorM. Perl
dc.contributor.authorR. Aroné
dc.date.accessioned2017-05-08T23:33:25Z
dc.date.available2017-05-08T23:33:25Z
dc.date.copyrightNovember, 1990
dc.date.issued1990
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28323#346_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/107368
dc.description.abstractIn Part I of this paper [1], it was suggested that the variation of the SIF at the tip of the varying cracks reflects, in fact, the characteristics of the stress field prevailing in the inter-crack region, prior to the introduction of these cracks. Therefore, using the FE method, the inter-crack stress field is investigated for various geometrical configurations, and the dependence of its characteristic parameters on the inter-crack region aspect ratio is determined. Under service conditions, it may sometimes occur that the penetration of the internal pressure into the crack cavity is only partial. Therefore, the effect of the actual fraction of the internal pressure, acting on the cracks’ faces is also analyzed. Once the inter-crack stress field is characterized, its effect on the initial values of the stress intensity factor of the varying cracks is determined. Finally, based on all the results obtained in both parts of this paper, a possible scenario of the time sequence of the cracking process of the vessel is suggested and discussed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleUniform Arrays of Unequal-Depth Cracks in Thick-Walled Cylindrical Pressure Vessels—Part II: The Inter-Crack Stress Field
dc.typeJournal Paper
dc.journal.volume112
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929888
dc.journal.fristpage346
dc.journal.lastpage352
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;1990:;volume( 112 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record