Show simple item record

dc.contributor.authorC. E. Jaske
dc.date.accessioned2017-05-08T23:33:24Z
dc.date.available2017-05-08T23:33:24Z
dc.date.copyrightNovember, 1990
dc.date.issued1990
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28323#323_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/107364
dc.description.abstractThis paper reviews the data needed to develop fatigue design rules for pressure vessels fabricated from heat-treated 2-1/4Cr-1Mo steel (SA-387, Grade 22, Class 2 plates and SA-336, Grade F22 forgings) that are operated or designed to operate at temperatures greater than 371 C (700 F). The available data were reviewed, and the results of that review were used to develop recommendations for needed analytical and experimental work. Extension of the fatigue-curve approach currently used for temperatures up to 371 C (700 F) and development of a fracture-mechanics-based, crack-growth approach were addressed. Both of these two approaches must include means for assessing the time-dependent effects of oxidation and/or creep when fatigue cycling occurs at low strain rates or includes hold times. The recommendations of this study provide a plan for the development of fatigue design rules for the use of heat-treated 2-1/4Cr-1Mo steel at temperatures in the range of 371 to 482 C (700 to 900 F).
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFatigue Curve Needs for Higher Strength 2-1/4Cr-1Mo Steel for Petroleum Process Vessels (Survey Paper)
dc.typeJournal Paper
dc.journal.volume112
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929884
dc.journal.fristpage323
dc.journal.lastpage332
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;1990:;volume( 112 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record