Show simple item record

dc.contributor.authorW. J. Mills
dc.contributor.authorL. D. Blackburn
dc.date.accessioned2017-05-08T23:32:51Z
dc.date.available2017-05-08T23:32:51Z
dc.date.copyrightJanuary, 1990
dc.date.issued1990
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26932#116_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/107043
dc.description.abstractHeat-to-heat and product-form variations in the JIC fracture toughness for Alloy 718 were characterized at 24, 427, and 538°C using the multiple-specimen JR -curve method. Six different material heats along with three product forms from one of the heats were tested in the modified heat treated condition. This heat treatment was developed at Idaho National Engineering Laboratory to improve the impact toughness for Alloy 718 weldments, but it has also been found to enhance the fracture resistance for the base metal. Statistical analysis of test results revealed four distinguishable JIC levels with mean toughness levels ranging from 87 to 190 kJ/m2 at 24°C. At 538°C, JIC values were 15 to 20 percent lower than room temperature toughness levels. Minimum expected values of JIC (ranging from 72 kJ/m2 at 24°C to 48 kJ/m2 at 538°C) and dJR /da (27 MPa at 24 to 538°C) were established based on tolerance intervals bracketing 90 percent of the lowest JIC and dJR /da populations at a 95 percent confidence level. Metallographic and fractographic examinations were performed to relate key microstructural features and operative fracture mechanisms to macroscopic properties.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleVariations in Fracture Toughness for Alloy 718 Given a Modified Heat Treatment
dc.typeJournal Paper
dc.journal.volume112
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903178
dc.journal.fristpage116
dc.journal.lastpage123
dc.identifier.eissn1528-8889
dc.keywordsAlloys
dc.keywordsHeat treating (Metalworking)
dc.keywordsFracture toughness
dc.keywordsToughness
dc.keywordsHeat
dc.keywordsFracture (Process)
dc.keywordsFractography
dc.keywordsBase metals
dc.keywordsTemperature
dc.keywordsElectrical resistance
dc.keywordsEngineering laboratories
dc.keywordsMechanisms AND Statistical analysis
dc.treeJournal of Engineering Materials and Technology:;1990:;volume( 112 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record