Show simple item record

dc.contributor.authorT. Tabata
dc.contributor.authorS. Masaki
dc.date.accessioned2017-05-08T23:32:51Z
dc.date.available2017-05-08T23:32:51Z
dc.date.copyrightJanuary, 1990
dc.date.issued1990
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26932#95_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/107041
dc.description.abstractRelationship between hardness and flow stress in uniaxial compression is investigated for porous sintered metals. Hardness is defined here as the applied load divided by the surface area of the indentation. When the semi-angle α of the pyramidal indenter is 68 deg, i.e., the Vickers hardness indenter, the ratio of the hardness to the flow stress decreases with decreasing relative density ρ However, when α is 45 deg, the ratio is 2.7 regardless of the value of ρ. The ratio of the Brinell hardness to the flow stress decreases with decreasing ρ when the diameter ratio d/D of the impression to the spherical indenter is 0.4. When d/D is 0.8, the ratio is nearly constant regardless of ρ. The flow stress of sintered metals can, therefore, be estimated from the hardness measured by the pyramidal indenter with the semiangle of 45 deg or from the Brinell hardness at a diameter ratio of 0.8.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEstimation of Flow Stress of Porous Sintered Metals From Hardness Test With Pyramidal and Spherical Indenters
dc.typeJournal Paper
dc.journal.volume112
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903193
dc.journal.fristpage95
dc.journal.lastpage98
dc.identifier.eissn1528-8889
dc.keywordsFlow (Dynamics)
dc.keywordsMetals
dc.keywordsStress
dc.keywordsCompression
dc.keywordsVickers hardness AND Density
dc.treeJournal of Engineering Materials and Technology:;1990:;volume( 112 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record