Show simple item record

dc.contributor.authorR. E. Cohen
dc.contributor.authorD. R. Durham
dc.date.accessioned2017-05-08T23:32:51Z
dc.date.available2017-05-08T23:32:51Z
dc.date.copyrightJanuary, 1990
dc.date.issued1990
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26932#90_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/107040
dc.description.abstractCylindrical compression specimens of 0.42 carbon steel were deformed at temperatures from 816 to 982°C (1500–1800°F) and at average strain rates of 0.5 to 3.0 s−1, to a true strain of 0.47. This testing was performed at the lower bound of the dynamic recrystallization region, where dynamic recovery can predominate. After deformation, the insulated specimens were allowed to slowly cool to room temperature under near equilibrium conditions. The resulting microstructures were examined by optical microscopy to determine whether there were significant variations, and if any observed variations could be related to the processing parameters. In the overall range of these temperatures and strain rates, there were changes in grain size and distribution. A large number of the tests produced similar structures in the middle range of temperatures. However, substantial differences were observed at the higher temperatures, with strain rate effects being particularly noticeable. At the lowest temperatures, interesting features of the microstructure were attributed to the proximity of the testing temperature to the transformation temperature.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMicrostructure as a Criterion for the Selection of Hot Working Process Parameters for Plain Medium Carbon Steel
dc.typeJournal Paper
dc.journal.volume112
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903192
dc.journal.fristpage90
dc.journal.lastpage94
dc.identifier.eissn1528-8889
dc.keywordsCarbon steel
dc.keywordsTemperature
dc.keywordsTesting
dc.keywordsCompression
dc.keywordsGrain size
dc.keywordsOptical microscopy
dc.keywordsDeformation
dc.keywordsRecrystallization AND Equilibrium (Physics)
dc.treeJournal of Engineering Materials and Technology:;1990:;volume( 112 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record